Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across Hurst
Garage door repair in Hurst typically costs $150 – $600, with most spring and cable jobs landing between $130 and $340. We run trucks into Hurst every weekday, and a live person answers the phone at (682) 730-8314 around the clock. If you live east of Hurstview Drive or up near Precinct Line Road with an original 1960s door, you’re exactly who we built our service around.
Most Hurst homes were built between 1960 and 1985. Those garages hold doors that predate safety sensors, torsion-spring retrofits, and even the companies that made the openers bolted to the ceiling. That’s not a reason to rip everything out. It’s a reason to work with a crew that knows which parts are still worth fixing and which are done. We’re Garage Door Repair specialists who carry hardware for legacy doors, not just new ones, because Hurst still has plenty of the old ones in daily use.
Why Brock Garage Doors Fort Worth Is Hurst’s Preferred Garage Door Repair Company
We’re an independently owned location within the Garrison Partners network, operating to The Garrison Standard since 2001. Every repair gets a written price before work starts, and every job carries the 365-Day Done Right Promise in writing. If the repair fails inside a year, we come back and make it right at no charge. No negotiation. No “well, that’s a different part.”
Wade Mercer, owner of Brock Garage Doors Fort Worth, runs a simple operation: background-checked, uniformed technicians; a live person on the phone 24/7; and a written price handed over before a single bolt turns. The technicians service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems. That matters in Hurst because original Clopay and Genie hardware from the 1970s still hangs in garages across the city, and the fix for a 1975 Genie is not the same as the fix for a 2019 Chamberlain.
Dispatch and scheduling coordinate from our Dallas-Fort Worth office, and crews serve Hurst locally. We know the subdivisions off Pipeline Road, the older streets near Bellaire, and the ranches along Hurstview where the original wood doors have seen fifty Texas summers.
Written by Wade Mercer, Owner at Brock Garage Doors Fort Worth.
Styles & brands we work with
Garage Door Maintenance in Hurst
Garage Door Maintenance in Hurst is an annual inspection and tune-up that catches failing springs, worn rollers, and misaligned tracks before they strand you in the driveway. Most single-door maintenance visits in this market run $120 – $180, depending on door age and condition. For a 1960s ranch door that’s been hanging for fifty years, you’ll want this done every spring, because Hurst humidity accelerates rust on hardware and summer heat swells the wood sections until they bind.
The Humidity and Heat Cycle
Hurst summers push temperatures past 100°F with humidity to match. Wood doors absorb moisture, swell, and start rubbing the jamb. Steel rollers grind against the track. The opener strains. A maintenance visit includes lubricating moving points, checking the balance, inspecting bushings and hinges, and testing the auto-reverse. For older systems, we also check for elongated mounting holes or stress cracks around the opener attachment.
When a Legacy Door Prints Signs
Original single-panel doors and early sectional doors often pass the eye test but hide trouble under the surface. We inspect extension-spring cables for fraying, photo-eye alignment, and the condition of the end bearing plates. If a part is borderline, we tell you what it costs to fix now versus replace later. The quote is in writing before any work begins.
Garage Door Roller Replacement in Hurst
Garage Door Roller Replacement in Hurst runs $110 – $220 and is one of the most common jobs on local ranches where nylon rollers have cracked or steel rollers have worn flat from decades of heat and dust. The first sign is usually noise: a loud, grinding hum as the door travels. Left alone, a collapsed roller will chew the track and can pull the door off its line.
Nylon vs. Steel on Old Doors
For Hurst doors from the 1960s through 1980s, we recommend nylon-bearing rollers. They run quieter and stay round longer than the factory steel rollers, which pick up grit from Texas dust and start wobbling. The retrofit is straightforward: remove the old rollers, clean the track, replace the hinges if they’re worn, and reset the door balance. Most jobs take under two hours.
What We See on Original Hardware
On doors installed before 1982, the roller stems are often shorter and the hinge brackets thinner than modern hardware. We stock both current and legacy roller stem lengths, so we don’t have to cobble something together. The price is quoted upfront, and the repair is covered in writing for a full year.
Trusted Brands We Service in Hurst
We service and stock parts for Genie, Clopay, and Amarr systems, among others. For Hurst homeowners, that means we often have the part on the truck the first time we pull up. Older Genie openers with chain-drive rails still operate in plenty of Hurst garages, and Clopay’s original wood door line shows up on ranches across the city. If we don’t stock a discontinued part, we source it through our Dallas-Fort Worth supply network, usually within one to two business days. The 365-Day Done Right Promise applies no matter which brand hangs in your garage.
Common Garage Door Repair Problems We See in Hurst Homes
- Pre-1982 extension springs snapping: These springs stretch, rust, and fatigue in Hurst’s humid summers. When one goes, it sounds like a gunshot and the door typically slams half-open and off-track. If your door still has two long springs stretched along the horizontal tracks, call before the next storm cycle.
- Swollen wooden door sections binding in summer: Original 1960s wood doors absorb humidity and press against the frame. The opener strips its gears trying to move the added weight. Maintenance and roller replacement reduce the friction, but badly warped sections usually need replacement.
- Hail damage to thin steel doors and misaligned photo-eyes: Spring thunderstorms along the I-820 corridor pound Hurst garages with hail. Thin single-panel steel doors dent, and the impact knocks photo-eye sensors out of alignment, causing the door to reverse for no reason. We check both after every storm.
- Hardware marked with a “Hurst Lumber” sticker: East of Hurstview Drive, many doors still bear the sticker from the long-gone Hurst Lumber company. That tells us the installation is original and the hardware is past its service life. We treat those jobs as legacy retrofits from the start.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Repair in Hurst, TX
Here are the line-item ranges for common repair work in Hurst:
| Service | Price Range |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Roller Replacement | $110 – $220 |
| Track Realignment | $120 – $240 |
What moves the number inside these ranges is part type and door age. A single torsion spring replacement on a standard 16-foot door sits around $200 – $260. High-cycle springs rated for 10,000+ cycles cost more and last far longer, which is worth it on doors that open four to six times a day. Cable jobs run toward the low end when it’s one cable; toward $250 when both cables and the drums are worn. Every job gets a written price before work begins. The number you approve is the number on the invoice. Call (682) 730-8314 for a free estimate.
We Also Serve Cities Near Hurst
Our crews cover Hurst and the surrounding Tarrant County suburbs, including Colleyville, Haltom City, Euless, and Fort Worth. If you’re in Garage Door Repair in Hurst-adjacent neighborhoods or just over the city line, call us and we’ll route a truck your way. The same written price and 365-day guarantee apply everywhere we run.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Hurst
Look above the horizontal tracks on both sides of the door. If you see two long, stretched springs running parallel to the track instead of one or two thick coiled springs mounted on a bar above the closed door, you have extension springs. These predate modern safety containment standards and stretch under load. When they break, they release violently. If your door still runs on them, retrofit with torsion springs now. Call (682) 730-8314 and we’ll inspect yours and quote the conversion in writing.
Hurst’s hot, humid summers swell the wood. The door rubs the jamb, the opener strains, and the gears inside wear out. If the swelling is moderate, roller replacement and a track realignment relieve most of the friction. If the panels are warped beyond adjustment, panel replacement is the fix. Most roller jobs in Hurst run $110 – $220. Call for an inspection and we’ll give you the exact number before starting.
First, test the door’s auto-reverse function, because hail often knocks the photo-eye sensors out of alignment. Then inspect for dents that could catch the panel as it travels. Minor dents are cosmetic. Deep dents on single-panel steel doors from the 1970s and 1980s often mean that panel has lost structural integrity. Panel replacement in Hurst runs $250 – $500. We’ll assess whether the door is worth repairing or replacing for free before any work starts.
If the panels are sound, repair makes sense and costs less. We can retrofit high-cycle torsion springs, replace cables and rollers, and realign the track, which keeps an original wood door operating smoothly. If the wood is termite-damaged, badly warped, or structurally soft, replacement is cheaper over time. New door installation ranges from $700 to $2,200, and we quote it in writing before ordering anything.
A standard torsion spring lasts about 10,000 cycles, which works out to seven to ten years for most Hurst homeowners who open the door twice a day. High-cycle springs rated for 25,000 cycles cost more but often outlast the opener. We offer both and can explain the difference for your specific door at the time of the estimate.
Call Brock Garage Doors Fort Worth for Garage Door Repair in Hurst
If your garage door is grinding, sticking, or slamming, call (682) 730-8314. A live person answers around the clock, including nights and weekends. We’ll schedule a time, dispatch a background-checked technician in uniform, and hand you a written price before any work begins. Every repair from Brock Garage Doors Fort Worth carries the 365-Day Done Right Promise. If it fails within a year, we return at no charge. That’s the deal, in writing, for every job in Hurst.
Written by Wade Mercer, Owner at Brock Garage Doors Fort Worth, serving Hurst.