Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPanel Replacement in Fort Worth, TX
A damaged garage door panel in Fort Worth is more than an eyesore. A cracked or dented section weakens the door’s structure, lets heat and pests in, and can throw the whole track out of alignment. Panel replacement fixes the damage without the cost of a full door swap. Brock Garage Doors Fort Worth replaces single and multiple panels on most major brands, and we hand you a written price before any work starts. Call (682) 730-8314 for a free estimate. For a broader look at what we handle, see our Garage Door Repair in Fort Worth page.
Most single-panel replacements in Fort Worth run $250 – $550 including the panel and labor. Multiple panels cost more, and if the door is older or the panel is discontinued, we’ll walk you through your options before you spend a dollar.
When You Need Panel Replacement
Not every dent calls for a new panel. These are the situations where replacement is the right call in Fort Worth’s climate:
- Storm damage from hail or wind. Fort Worth gets its share of spring hailstorms. A panel with cracks radiating from the impact point has lost its structural integrity, even if it still hangs straight.
- Vehicle impact. A bumper or trailer hitch can crease the bottom panel and bend the lower rail. Fixing the rail alone won’t stop the panel from flexing every time the door cycles.
- Rust or corrosion. Older steel panels, especially on doors facing north or shaded by trees, develop rust along the bottom edge. Once rust perforates the panel, patching is a temporary cover for a permanent problem.
- Cracked or broken stiles. The vertical metal braces inside the panel are what the hinges bolt into. If a stile is cracked, the hinge pulls loose and the panel sags.
- Mismatched repairs from a previous owner. When a panel was swapped years ago and the color or profile doesn’t match, replacement restores the door’s appearance and resale presentation.
- Sagging center on double doors. A wide door with a bowed center panel puts uneven load on the tracks and rollers, wearing them out faster.
If you’re not sure whether the panel can be salvaged, call us. We’ll tell you straight: repair if it’s repairable, replace if it’s not, and you’ll have the price in writing either way.
Our Panel Replacement Process
Here’s how a panel replacement works when Brock Garage Doors Fort Worth takes the job:
- Inspection and measurement. A technician checks the door’s brand, panel profile, and dimensions. We also inspect the hinges, rollers, and track alignment, because a panel that failed often stressed the parts around it.
- Written quote. Before anything is ordered or unbolted, you get a written price covering the panel, any needed hardware, and labor. The number on the invoice matches the number you approved.
- Panel sourcing. We match the panel to your door’s manufacturer profile. For doors from Clopay, Amarr, or Chamberlain systems, we use manufacturer-matched or equivalent-grade panels, not universal knockoffs.
- Disassembly and replacement. The damaged panel is unbolted from the hinges on either side and removed. The new panel goes in, hinges are re-torqued, and the door is cycled to confirm alignment.
- Track and balance check. We run the door through several full cycles, check the track spacing, and confirm the springs are carrying the load evenly after the panel swap.
- Cleanup and written guarantee. The work area is left clean, old panel debris is hauled away, and you receive the 365-Day Done Right Promise in writing: if the replacement fails within a year, we return and make it right at no charge.
Panel Replacement Pricing in Fort Worth
What you’ll pay depends on a few specific factors. Here’s the honest breakdown for the Fort Worth market:
- Single standard panel: $250 – $400, typical for a 16×7-foot door with a common panel profile.
- Single insulated panel: $300 – $500, for doors with polyurethane or polystyrene core insulation.
- Two-panel replacement: $450 – $750, when storm damage spans two sections.
- Bottom panel only: $200 – $350, the most commonly hit section, usually the cheapest single-panel job.
- Custom or discontinued panel match: $500 – $850, when the panel must be special-ordered or color-matched to a discontinued line.
- Panel plus damaged hardware: Add $40 – $120 per hinge, roller, or bracket that was bent in the impact.
Three things move the price up or down: the door brand, whether the panel is insulated, and whether the profile is still in production. Doors from Genie and Amarr lines that are still manufactured are faster and cheaper to match than a panel for a door that was discontinued a decade ago.
Every quote is free. Call (682) 730-8314 and a live person answers, day or night. We’ll give you a written number before any work is authorized.
What It Costs to Skip the Repair
Delaying panel replacement in Fort Worth’s heat and humidity has a real cost. A cracked panel lets summer heat into the garage, and if the garage is attached, your cooling bill climbs with it. A sagging or broken panel drags on the track, putting extra load on the rollers, hinges, and the torsion spring, the thick coiled spring above the door that bears most of the lifting load. A spring that fails under uneven load can snap, and a door with a snapped spring is not something to operate manually. If the panel has pulled the door off balance, call us, because a garage door under tension is a danger to work around without the right training and tools.
Replacing the panel now is cheaper than replacing the panel, the spring, bent track sections, and the rollers later, as our Garage Door Repair services often show. We’ve seen doors where a $300 panel job became a $900 repair because the damage was left for a season.
FAQs – Panel Replacement
Can you replace just one panel, or do I need a whole new door?
You can replace just one panel on most doors, as long as the rest of the door is structurally sound and the panel profile is still available from the manufacturer. If the door is older and the panel is discontinued, or if the damage extends into the stiles and hinges of neighboring sections, a full door may be the better use of your money. We’ll show you both numbers before you decide. Call (682) 730-8314 for a free assessment.
How much does panel replacement cost in Fort Worth?
Most single-panel replacements in Fort Worth run $250 – $550, with insulated and custom-matched panels at the higher end. Two-panel jobs typically land between $450 and $750. The exact number depends on your door’s brand, profile, and insulation, and you’ll have it in writing before you approve anything.
Can you match the color of my existing door?
In most cases, yes. We match by manufacturer and panel profile first, then by color. For a door from Clopay or Amarr that’s still in production, the match is straightforward. For discontinued colors, we’ll order a color-matched panel or present a repaint option for the full door. Either way, you’ll see the price before work begins.
Can you come out the same day?
In most Fort Worth neighborhoods, yes. We keep common panel profiles in stock and a live person answers calls 24 hours a day, seven days a week. If your panel is a standard profile on an active manufacturer line, a same-day or next-day replacement is realistic. Call (682) 730-8314 and we’ll give you a straight answer on timing.
Is panel replacement covered by your guarantee?
Yes. Every panel replacement from Brock Garage Doors Fort Worth carries the 365-Day Done Right Promise in writing. If the replacement panel or the related hardware fails within a year, we return and correct it at no charge. The guarantee is part of every job, not an add-on, and it’s printed on the invoice you receive.
For more on what goes into a proper garage door fix, read our home page overview of the full range of work we handle across Fort Worth.
Key Takeaways
- Single-panel replacement in Fort Worth typically costs $250 – $550; two panels run $450 – $750.
- Storm hail, vehicle impact, rust, and cracked stiles are the most common reasons for panel replacement in this area.
- Brock Garage Doors Fort Worth provides a written price before work starts, on every job.
- Every panel replacement is covered by the 365-Day Done Right Promise in writing.
- A live person answers (682) 730-8314 around the clock, including weekends and holidays.
Call Brock Garage Doors Fort Worth for Panel Replacement
If a hailstone, a bumper, or years of Texas weather have damaged a panel on your garage door, we’ll replace it to The Garrison Standard: written price first, work done by the book, job site left clean, and a full-year guarantee in writing. We’re an independently owned and operated location in the Garrison Partners network, and every technician who shows up at your door is background-checked and uniformed, trained on Chamberlain, Genie, Clopay, and Amarr systems, including Sensor Calibration. Call (682) 730-8314 for a free estimate. A real person answers.
Written by Wade Mercer, Owner at Brock Garage Doors Fort Worth, serving Fort Worth.